|
 
|
pH And Conductivity Meters |
|
|
Our pH and Conductivity Meter has been developed to facilitate easy determination of conductivity of nonferrous metals based on eddy current principle. It uses a probe which when placed on the surface of metal indicates conductivity on a linear scale panel meter. These ph meters, conductivity meters, ph analyzers, digital conductivity meters can also be used for measuring stressed conditions if they can be related to the electrical conductivity of the specimen.
|
- Advanced Micro controller based user friendly state-of-the-art product design.
- PICO pH Meter complies to USP and DIN standards.
- Sleek moulded cabinet with alphanumeric splash waterproof polyester keyboard with soft keys.
- User interactive software in dialogue mode for ease of operation with protection against invalid entries.
- 20 x 2 line back lighted LCD display.
- Simultaneous measurement of pH, mV and temperature.
- Non- volatile memory storage of :
- 40 pH and 40 mV readings with temperature in pre-selected GLP or Non-GLP format.
- 24 data memory readings of pH, temperature and time in data logging mode (optional).
- Password protection for calibration data and stored Readings.
- Calibration data with date and time stamp for authentication. Facility to view the calibration data.
- Calibration reminder alarm.
- Alphanumeric entries of sample name, identification number for authentication.
- Automatic temperature compensation by Pt.100 temperature sensor. Range 0o to 150oC.
- 3 point (Iso potential) or 5 point (linear or segmented)calibration protocol.
- Input stability indicator for reproducible results.
- Built-in real time clock (RTC) for time display and on report printout.
- Factory entered CUSTOMER NAME on report printout for authentication.
- Error indication helps the user to trace the problem.
- Audible beep indication during valid key operation.
- PC compatibility for data downloading (optional)
- Combined pH and conductivity instrument is available.
| 
| | |
Microprocessor Controlled PH Analyzer (PHAN) - Advanced micro-controller based user-friendly state-of-the-art design.
- Sleek moulded cabinet with Multifunction splash waterproof polyester keyboard with soft keys.
- User interactive software with direct keys for ease of operation with protection against invalid entries.
- 20 x 2 line back lighted LCD display.
- Simultaneous measurement of pH, mV and Temperature. SCAN key for displaying the stored pH values with Memory SET & Reading No.
- Non-volatile memory storage of 40 pH readings in four sets of 10 readings each.
- AVERAGE function key to check the Average of the pH reading stored in the selected memory SET.
- MEM CLEAR Key to clear the pH data / reading memory buffer block and calibration data.
- Calibration of instruments with 4.00, 7.00, 9.20 and User Assigned / selected calibration standard with ASSIGN key.
- Built-in ATC with selection of Automatic / Manual mode. ATC temperature at 25oC or at Manually User-entered Temperature. Automatic Temperature Compensation by PT100 Temperature sensor Range 0o to 100oC.
- Input Stability Indication for reproducible results.
- Probe Check Mode for checking Electrode Aging.
- Error indication helps user to trace the problem.
- Audible Beep indication during Valid Key operation.
| 
| | |
PICO PH/ Conductivity Meter - Advanced microcontroller based user friendly stateof-the-art design.
- PICO pH Meter complies to USP and DIN standards.
- Sleek moulded cabinet with alphanumeric splash waterproof polyester keyboard with soft keys.
- User interactive software in dialogue mode for ease of operation with protection against invalid entries.
- 20×2 line back lighted LCD display.
- Simultaneous measurement of pH, mV and temperature. Conductivity, TDS & Salinity optional.
- Non-volatile memory storage of :
- 40 pH and 40 mV readings with temperature in pre-selected GLP or Non-GLP format.
- 24 data memory readings of pH, temperature and time in data logging mode (optional).
- Password protection for calibration data and stored Readings.
- Calibration data with data and time stamp for authentication. Facility to view the calibration data.
- Calibration reminder alarm.
- Alphanumeric entries of sample name, identification. Facility to view the calibration data.
- Input stability indicator for reproducible results.
- Built-in real time clock (RTC) for time display and on report printout.
- Factory entered CUSTOMER NAME on report printout for authentication.
- Error indication helps the user to trace the problem.
- Audible beep indication during valid key operation.
- PC compatibility for data downloading (optional)
- Combined pH and conductivity instrument is available.
- PH Meter
- Automatic temperature compensation by Pt.100 temperature sensor. Range 0o to 150oC.
- 3 point (potential) or 5 point (linear or segmented) calibration protocol.
- Conductivity Meter
- Automatic evaluation of CELL constant with standard solution.
- User selectable temperature coefficient for automatic temperature compensation, through special TEMPCO key.
| 
| | |
|
